b12b10b9b8b7b6b5b4b3b2a1b1

nrg mirror heater
Bathroom Mirror Defogger

Home Mirror Defoggers Specification Technical Installation Warranty F.A.Q Contact us
Mounting hole & Dome fogless mirrors to the wall Home > Installation   
Back to Before you begin

Mounting Hole & Dome Mirrors To The Wall
1, Ensure the mirror sits flat by holding mirror against the wall in the correct position and at the sametime mark the centre of the 4 holes.


2, Use an electrician to connect the power cord.
 
3, Hang mirror as per holes & dome instruction supplied
with the mirror. Feed the excess wire into the wall cavity during installation.



4, Seal the mirror edges using a
neutral cure silicon.

For Tile Wall
If you do not wish to recess a hole in the tiles the mirror can be packed behind the holes using a number
of rubber washers. Use longer screws.
Ensure you only hand tighten the screws so the corner of the mirror does not bend and snap.

Back>>
About Us    |   Technical   |   Installation   |   Warranty   |   FAQ   |   Blog   |   Site map   |   Contact us
Copyright© CHOICE TOPIA INTERNATIONAL LIMITED all rights reserved
Email: info@choicetopia.cn  choicetopia@gmail.com  No.719 Pujian Rd,Shanghai, CN   
mirror defogger          mirror heater
nrg your free consultant on mirror defogging. our mirror heating pads made with 12 years experience in China, professionally for hotels fog free mirror and bathroom cabinet heated mirrors. The heated mirror will result into bathroom mirrors fog free in the steamy bathroom after shower.